Set The Date And Time - Accumetrics VerifyNow User Manual

Figure 8-2 Adjust Backlight
Press the Back
5.
8.3

Set the Date and Time

The date and time is initially configured during installation. However, this setting will
need to be adjusted during a leap year and twice annually for Daylight Savings Time.
Use the following procedure to adjust the setting:
From the main menu, enter
1.
the keypad to enter the Operator ID number at the prompt. Press the Tab key to
advance to the Password prompt to enter the password number.
Press the Maintenance
2.
Press the Next
3.
navigating within the Maintenance section.
Press the Date/Time
4.
Figure 8-3 Date and Time Setting
Current Setting
Time
Date
Record the new time stamp according to a 24-hour clock format. Press the Tab
5.
key to move between the settings. For example, 1:30 pm is equivalent to 13:30 in
VerifyNow System User Manual
key once to return to the Main Menu.
Operator ID and
key.
key two times. Refer to the Appendix for information on
key to display the setting (Figure 8-3).
Page 73
INSTRUMENT SETTINGS - 8
Backlight
Back
Password, if required. Use
Save Setting
Back
14340.J