Table of Contents
Advertisement
Figure 6-7 Inspect Humidity Indicator and Prepare Needle
Open the cover. Using the finger grip, insert the assay device into the assay
9.
device port until it clicks (Figure 6-8).
Figure 6-8 Insert Device
If the assay device is the first from a new lot, the instrument will display a bar
10.
code screen as soon as the assay device is inserted into the port and the spot
code is read. (Figure 6-9). Place the assay device pouch in front of the bar code
scanner on the left side of the instrument so that the bar code on the bottom edge
of the pouch lines up with the scanner window. Move the pouch both towards and
away from the instrument. An audible beep will be heard when the instrument
reads the information. Press the Retry
code the first time.
VerifyNow System User Manual
key if you are unable to scan the bar
Page 50
PATIENT TESTING - 6
14340.J
Hide quick links:
Advertisement
Table of Contents
