Accumetrics VerifyNow User Manual page 32

NOTE: Do not try to re-attach any assay device needles that may inadvertently
removed. If this occurs, discard the device and use a new one
Figure 5-9 Inspect Humidity Indicator and Prepare Needle
Open the cover. Using the finger grip, insert the assay device into the assay
12.
device port until it clicks (Figure 5-10).
Figure 5-10 Insert Device
If the assay device is the first from a new lot, the instrument will display a bar
13.
code screen as soon as the assay device is inserted into the port and the device
spot code is read. (Figure 5-11). Position the barcode of the assay device pouch
in front of the bar code scanner on the left side of the instrument so that the bar
code on the bottom edge of the pouch lines up with the scanner window. Move
the pouch both towards and away from the red barcode light. An audible beep will
be heard when the instrument reads the information. Press the Retry
you are unable to scan the bar code the first time.
VerifyNow System User Manual
Barcode Scanner
Page 32
QUALITY CONTROLS - 5
key if
14340.J