Transfer Network Data - Accumetrics VerifyNow User Manual

7.5

Transfer Network Data

The VerifyNow network integration package is an optional accessory to the
instrument. This software package enables an operator to transfer a data file from
the instrument to a computer connected to the network. The data file contains all
assay results, WQC and EQC results, and error reports stored in the instrument's
memory. Contact Accumetrics Customer Support for ordering information.
If your instrument is configured to support network integration, use the following
procedure to transfer instrument data to a network computer:
From the main menu, enter
1.
the keypad to enter the Operator ID number at the prompt. Press the Tab key to
advance to the Password prompt to enter the password number.
Press the Maintenance
2.
Press the Next
3.
Press the Network
4.
The instrument will display the status of the transfer and indicate when the
5.
transfer has completed (Figure 7-8).
Figure 7-8 Network Data Transfer
A message displays when the data transfer has completed successfully. Press
6.
the Back key six times to return to Main Menu.
VerifyNow System User Manual
Operator ID and
key.
key four times.
key to initiate the data transfer.
Page 69
RETRIEVING TEST RESULTS - 7
Password, if required. Use
14340.J