Accumetrics VerifyNow User Manual page 51

Figure 6-9 Scan Bar Code
After the bar code has been scanned once, the instrument will accept all
remaining assay devices from that lot without displaying the bar code screen.
NOTE: If you are experiencing difficulty scanning the bar code, try adjusting the
angle of the scan by raising the corner of the instrument.
Gently invert the sample tube five times to mix the reagents immediately before
11.
use (Figure 6-10).
Figure 6-10 Invert Tube
Wait for the Insert Tube icon to display, then insert the sample into the sample
12.
well of the assay device with the rubber stopper facing downward so that the
needle pierces the stopper (Figure 6-11). The instrument will produce two audible
beeps when the tube has been fully inserted.
VerifyNow System User Manual Page 51
PATIENT TESTING - 6
Bar Code
14340.J