Browse Vlan; Show Vlan Ports - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
VLAN Trunk State
Unit
Ports
Click the Apply button to accept the changes made for each individual section.

Browse VLAN

Users can display the VLAN status for each of the Switch's ports viewed by VLAN. Enter a VID (VLAN ID) in the field at
the top of the window and click the Find button.
To view the following window, click L2 Features > VLAN > Browse VLAN, as show below:
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
NOTE: The abbreviations used on this page are Tagged Port (T), Untagged Port (U) and Forbidden
Port (F).

Show VLAN Ports

Users can display the VLAN ports of the Switch's viewed by VID. Enter a Port or a Port List in the field at the top of the
window and click the Find button.
To view the following window, click L2 Features > VLAN > Show VLAN Ports, as show below:
Figure 4-25 VLAN Trunk Settings window
Description
Enable or disable the VLAN trunking global state.
Select the unit you wish to configure.
The ports to be configured. By clicking the Select All button, all the ports will be included.
By clicking the Clear All button, all the ports will not be included.
Figure 4-26 Browse VLAN window
100