1 Press the overflow protection float into the rising pipe
until it clicks into place. The float must move freely
without falling out.
2 Uniformly button the silicone sleeve onto the cover.
Connect the bottle cap to the secretion collecting
bottles.
Place the secretion collecting bottle in the inner
sleeve and the rinsing bottle in the outer sleeve.
3 Fit the vacuum hose to the port on the Julian and to
the thin port on the cap.
4 Fit the suction hose to the thick port on the cap.
5 Fit the secretion inspection window in the suction
hose.
Connecting the measured gas recirculation system
6 Fit the short hose to the port of the measured gas
outlet.
7 Fit the long hose to the port of the recirculation
system.
3
5
4
3
Care
Assembling
5 1
2
4
6
7
109