Oracle X7-2L Service Manual page 160

Remove the Disk Backplane
4. Using a Torx T15 screwdriver, loosen the right-side and left-side spring-mounted
screws that secure the disk backplane to the chassis [3].
Using a Torx T25 screwdriver, loosen the spring-mounted screws that secure the
5.
backplane bracket to the chassis, then lift the bracket from the server [4].
6. Lift the disk backplane up to release it from the standoff hooks and out of the
chassis [5 and 6].
7. Place the disk backplane on an antistatic mat.
Related Information
"Install the Disk Backplane" on page 161
■
160 Oracle Server X7-2L Service Manual • October 2017