Oracle X7-2L Service Manual page 58

Power Down the Server for Immediate Shutdown Using the On/Standby Button
1. Log in to the Oracle ILOM web interface using an Administrator account.
The Oracle ILOM web interface System Information → Summary Information page appears.
2. In the left pane, click Host Management → Power Control, and click Immediate
Power Off in the Select Action list.
3. Click Save, and then click OK.
The server powers down immediately.
4. Disconnect the power and data cables from the server.
See "Disconnect Cables From the Server" on page
Caution -
power mode. Power is still directed to the service processor and power supply fans. To
completely power off the server, you must disconnect the power cords from the power supplies.
Related Information
"Power Down the Server for Immediate Shutdown Using the On/Standby
■
Button" on page 58
"Power Down the Server for Immediate Shutdown Using the Oracle ILOM
■
CLI" on page 57
"Power On the Server" on page 216
■
Power Down the Server for Immediate Shutdown Using the
On/Standby Button
Caution -
system data during an immediate power-down, so use this procedure to power down the server
only after attempting the graceful power-down procedure.
1. Press and hold the On/Standby button for four seconds to force the Main power
off and to enter Standby power mode.
When Main power is off, the System OK LED on the front panel begins flashing, indicating that
the server is in Standby power mode. See
Disconnect the power cords and data cables from the server.
2.
See "Disconnect Cables From the Server" on page
58 Oracle Server X7-2L Service Manual • October 2017
When you power down the server using Oracle ILOM, the server enters Standby
This procedure quickly forces the server main power off. You might corrupt your
59.
"Server System-Level Status Indicators" on page
59.
29.