Oracle X7-2L Service Manual page 238

Configure UEFI Driver Settings
4. On the Internal Devices screen, select the internal device or add In card slot that
you want to configure.
5.
On the PCI-E UEFI Driver Enable screen, select PCI-E UEFI Driver Enable and
press Enter. Do one of the following:
■
Select Enabled to enable the PCI-E UEFI Driver setting.
■
Select Disabled to disable the PCI-E UEFI Driver setting.
6. Press the F10 key to save the changes and exit the BIOS Setup Utility.
Related Information
"Access BIOS Setup Utility Menus" on page 227
■
"BIOS Setup Utility Menus" on page 226
■
"Exit BIOS Setup Utility" on page 253
■
238 Oracle Server X7-2L Service Manual • October 2017