Install A Storage Drive - Oracle X7-2L Service Manual

Install a Storage Drive

5. Grasp the latch and pull the drive out of the drive slot.
6. Consider your next steps:
If you are replacing the drive, continue to
■
If you are not replacing the drive, install a filler panel in the empty drive slot to maintain
■
proper airflow and perform administrative tasks to configure the server to operate without
the drive.
For information on how to install a storage drive filler panel, see
Panels" on page
Related Information
"Storage Drive Status Indicators" on page 31
■
"Storage Drives Hot-Plug Conditions" on page 67
■
"Storage Drive Failure and RAID" on page 68
■
"Install a Storage Drive" on page 72
■
Install a Storage Drive
Remove the replacement drive from its packaging, and place the drive on an
1.
antistatic mat.
72 Oracle Server X7-2L Service Manual • October 2017
212.
"Install a Storage Drive" on page
"Remove and Install Filler
72.