Power Down the Server Gracefully Using the On/Standby Button
Caution -
power mode. Power is still directed to the service processor and power supply fans. To
completely power off the server, you must disconnect the power cords from the power supplies.
Related Information
"Power Down the Server Gracefully Using the Oracle ILOM CLI" on page 54
■
"Power Down the Server Gracefully Using the On/Standby Button" on page 56
■
"Power Down the Server for Immediate Shutdown Using the On/Standby
■
Button" on page 58
"Power On the Server" on page 216
■
Power Down the Server Gracefully Using the On/Standby
Button
1.
Press and quickly release the On/Standby button on the front panel.
This action causes ACPI-enabled operating systems to perform an orderly shutdown of the
operating system. Servers not running ACPI-enabled operating systems shut down to Standby
power mode immediately.
When main power is off, the System OK LED on the front panel begins flashing, indicating that
the server is in Standby power mode. See
Disconnect the power cords and data cables from the server.
2.
See
"Disconnect Cables From the Server" on page
Caution -
Standby power mode. Power is still directed to the service processor and power supply fans. To
completely power off the server, you must disconnect the power cords from the power supplies.
Related Information
"Server System-Level Status Indicators" on page 29
■
"Power Down the Server Gracefully Using the Oracle ILOM CLI" on page 54
■
"Power Down the Server Gracefully Using the Oracle ILOM Web Interface" on page 55
■
"Power On the Server" on page 216
■
56
Oracle Server X7-2L Service Manual • October 2017
When you power down the server using Oracle ILOM, the server enters Standby
When you power down the server using the On/Standby button, the server enters
"Server System-Level Status Indicators" on page
59.
29.