Oracle X7-2L Service Manual page 162

Install the Disk Backplane
3. Using a Torx T15 screwdriver, tighten the right-side and left-side spring-mounted
screws to secure the disk backplane to the chassis [4].
Reconnect the cables to the disk backplane.
4.
a. Reconnect the auxiliary signal cable to the disk backplane [5].
b. Reconnect the temperature signal cable to the disk backplane [5].
c. Depending on your storage drive configuration, do one of the following:
■
■
Reconnect the power cable to the disk backplane [6].
d.
5. Return the server to operation.
Install the fan tray.
a.
See
b. Install the fan modules.
See
c. Install the air baffle.
See
Install the server top cover.
d.
See
e. Install all storage drives into the storage drive cage.
See
162 Oracle Server X7-2L Service Manual • October 2017
Reconnect the three SAS cables to the disk backplane [6].
To ensure proper SAS cable connections, see
Cables" on page 190.
Reconnect the twelve NVMe cables (not shown) to the disk backplane
[6]
To ensure proper NVMe cable connections, see
Cables" on page 196.
"Install the Fan Tray" on page
"Install a Fan Module" on page
"Install the Air Baffle" on page
"Install the Server Top Cover" on page
"Install a Storage Drive" on page
"Install SAS Storage Drive
"Install NVMe
90.
87.
113.
212.
72.