Record Settings - Teltonika FM1000 ST User Manual

timeout has not passed since device was turned on for faster FIX receiving. If ignition is off
charger must be turned off.
Mode Switch by
Ignition
(recommended)
Movement
(accelerometer)
GNSS
5.9

Record settings

Here user can modify if FM1000 device will send newest records first, meaning, that the
most important thing is to know recent position of car, older records are being sent right after
newest records arrive to AVL application.
Vehicle on Stop mode
If ignition is low (Configured to be
detected by Power
Ignition or Accelerometer)
Internal accelerometer does not
detect movement
GNSS fix is available and vehicle
speed is lower than 5 km/h
While GNSS fix is unavailable, Object Motion Detection Settings are
working like in Movement mode
Figure 13 System settings configuration
Vehicle Moving mode
If ignition is high (Configured to be
Voltage, detected
Ignition or Accelerometer)
Internal accelerometer
movement
GNSS fix is available and vehicle
speed is higher than 5 km/h
by Power Voltage,
detects
27