Geofencing Settings - Teltonika FM1000 ST User Manual

5.11.3 Geofencing settings

FM1000 has 5 configurable Geofence zones and it can generate an event when defined
Geofence zone border is crossed.
Frame border – frame border is an additional border around Geofence zone. It is additional
area around defined zone used to prevent false event recording when object stops on the border
of the area and because of GNSS errors some records are made inside area and some – outside.
Event is generated only when both borders are crossed. See figure 26 for details: blue track is
considered to have entered the area while red track is not.
Shape – can be rectangle or circle.
Priority – priority of Geofence event: low, high or panic. These levels define priority of
event information sending to server. See I/O element description for more details about
priorities.
Generate event (On entrance, On exit, On Both) – choose when record will be generated;
X1 – geofence zone left bottom corner X coordinate (longitude);
Figure 25 Odometer value configuration
Figure 26 Geofence border
38