Firmware; Updating Firmware Using Usb Cable - Teltonika FM1000 ST User Manual

4 FIRMWARE

4.1

Updating firmware using USB cable

FM1000 functionality is always improving, new firmware versions are developed.
Current module firmware version can be retrieved from Configurator.
Connect FM1000 to PC with the USB cable. Launch "Firmware Updater", select COM port
to which device is connected, click connect, and when IMEI and Firmware version fields are filled,
start the update. Device needs some time to send IMEI and Firmware version, so do not be afraid
if IMEI will not show up immediately, disconnect and after 1-2 minutes try to connect again.
When starting update device will open link with updater. With link open device downloads
firmware and starts installing. Wait thru all these screens as in Figure 9 for firmware to update.
Update process may take up to several minutes.
Figure 7 COM-Ports
17