Parameters are separated by comma (no spaces needed). In case you don't need to enter
parameter (Login/Pass) – do not put space, simply put comma and write next parameter.
Example: opa opa flush 356307044051570,banga,,,212.47.99.62,12050,0
Response details
FLUSH SMS Accepted
# records found on FLASH
Minimum Records to Send: #
GPRS Enabled: #
Time Sync: #
Example: FLUSH SMS Accepted. 11 records found on FLASH. Minimum Records to Send: 1.
GPRS Enabled: 1. Time Sync: 1.
6.1.15 banlist
Gives a list of all banned operators.
Example when no operators are banned: 0000.00s.0.000
6.1.16 crashlog
Gives the last information before the device has crashed for unexpected reasons. It is
useful when the device acts unexpectedly or restarts for unexplained reasons.
Example if no unexpected reset: "Crash: "
Example if unexpected reset was detected: "Crash: 3051,3052,3053".
6.1.17 defevt
This SMS command resets SMS Events configuration to default.
Example: SMS Event default parameters loaded.
6.1.18 battery
Returns FM1000 battery information.
Example: BatState: 1 FSMState: ACTIVE ChargerIC: CHARGING ExtV: 14020 BatV: 3800 BatI:
50 PCBTemp: 35.2.
6.1.19 cleardtc
Clears all vehicle stored trouble codes and turns the MIL off.
Examples: DTC cleared: OK; or: DTC cleared: ERROR.
6.1.20 obdinfo
Response details
LIST of OBD info
Description
FLUSH SMS Accepted
Number of records found on FLASH
Number of minimum saved records to send
State of the GPRS connection, 0 – disabled; 1 – enabled
Indicates time synchronization on the device, 0 – not
synchronized; 1 – synchronized
Description
Protocol, VIN, AdaptiveTiming value, requested PID counter, OBD
application state, available vehicle PIDs, mil status, number of
DTCs
52