Device Gprs Configuration For Aws Iot Custom Mqtt Settings; Checking Received Data And Sending Commands In The Aws Iot Core - Teltonika FMB125 Getting Started

Device GPRS configuration for AWS IoT Custom MQTT settings

In the GPRS tab, under Server Settings select:
1. Domain – Endpoint from the AWS, Port: 8883
2. Protocol – MQTT
3. TLS Encryption – TLS/DTLS
In the MQTT Settings section select:
1. MQTT Client Type – AWS IoT Custom
2. Device ID – enter device IMEI (optional)
3. Leave Data and Command Topics unchanged.
Save the configuration to the device.
Checking received data and sending commands in the AWS
IoT core
The data received from the device can be found in the MQTT test client, which can be found above
"Manage" in the sidebar on the left.
To see incoming data, subscribe to topic - *DeviceImei*/data . Or subscribe to # to see all incoming
outgoing data in the Topics.
Figure 19. Choosing data protocol
Figure 27. GPRS Settings for MQTT AWS IoT
Figure 28. MQTT test client location