Parameter List; Parameters Value Types; System Parameters; Sleep Mode (Id=1000) - Teltonika FM1000 ST User Manual

F

9 Parameter List

9.1

Parameters value types

S8 – Signed Char
S8[n] – String of n Char
U8 – Unsigned Char
U16 – Unsigned Short
S32 – Signed Integer
U32 – Unsigned Integer
U64 – Unsigned Long Integer
9.2

System parameters

9.2.1

Sleep Mode (ID=1000)

Device has two sleep modes: sleep and deep sleep mode. While sleep is disabled (value 0)
module will never enter sleep mode, in sleep mode (value 1) module reduces level of power
usage by turning GNSS module to sleep, in deep sleep mode (value 2) module turns GNSS
module to sleep and switch GSM module off (note, that FM1000 do not receive SMS while in
deep sleep).
Minimum Maximum
value value
0 2
9.2.2

Sleep timeout (ID=1001)

Sleep timeout is time after which FM1000 goes to sleep or deep sleep if other
requirements are met. It is measured in minutes.
Minimum Maximum
value value
Figure 37 Terminal window for logging
Recommended Goes with (depends on)
value
-
Recommended Goes with (depends on)
value
parameters
parameters
Value
type
U8
Value
type
56