Configuration; Configurator - Teltonika FM1000 ST User Manual

5.5

Configuration

Installing FM1000 for configuration:
Plug in device to OBD-II power adapter (accessory is optional).
Connect output wires to DC power source (10-16V).
Plug in USB mini cable.
Open configurator and configure your device.
5.6

Configurator

FM1000 configuration is performed via FM1000 Configurator program. Contact sales
manager to get the latest FM1000 Configurator version. FM1000 configurator operates on
Microsoft Windows OS and uses MS .Net Framework 3.5 or higher. Please ensure that MS .Net
Framework 3.5 or later is installed on your PC before starting configurator. Latest MS .Net
Framework version can be downloaded from official Microsoft web page.
Module configuration is performed over USB cable. Configuration process starts from
starting FM1000 Configurator program and then connecting to FM1000 device via Connect
button located on the top left corner of configurator. If connected successfully IMEI, Version
fields which were empty, now are filled with certain numbers depending on Modem IMEI and
firmware version of your device (figure below).
New FM1000 module has default recommended factory settings. Recommended settings
have optimal parameters to ensure best performance of track quality and online data sending.
Figure 10 inserting FM1000 to OBD-II connector
23