Data Acquisition Mode Settings - Teltonika FM1000 ST User Manual

Note: If home operator code is written in operator list, FM device looks for all
available operators, checks operator list, and connects to specified operator
network. It takes few seconds. If current operator code is not written in
operator list, FM device connects to SIM home operator automatically, which
is faster. So we recommend to leave empty first row in operator list, because
it is a faster way to catch home operator.

5.11 Data Acquisition Mode settings

Data Acquisition Modes are an essential part of FM1000 device, it is also highly
configurable.
By configuration user defines how records will be saved and sent. There are three different
modes: Home, Roaming and Unknown. All these modes with configured data acquisition and
send frequencies depend on home or roaming operator and are switched when GSM operator
changes from home to roaming or vice versa (e.g. vehicle passes through country boarder).
Unknown profile switches on when device can't find home operator or no operator reachable
from roaming list.
If current GSM operator is defined as Home Operator, device will work in Home
Acquisition mode, if current operator is defined as Roaming Operator, device will work in
Roaming Data Acquisition mode, and if device can't find home operator or no operator reachable
from roaming list device will work in Unknown Acquisition mode.
This functionality allows having different AVL records acquire and send parameters values
when object is moving or stands still. Vehicle moving or stop state is defined by Mode Switch
parameter. There are 3 ways for FM1000 to switch between Vehicle on Stop and Vehicle Moving
modes see section.
FM1000 allows having 6 different modes. Operational logic is shown in Figure 19 Data
Acquisition Mode
Note: If SIM card is not inserted device works in Unknown mode.
5
Home operator is searched automatically from 00.02.14 rev.02 firmware version.
5
Data
32