I/O#1 Logic Operand (Id=1304); I/O#1 Averaging Length (Id=1305) - Teltonika FM1000 ST User Manual

Minimum Maximum
value value
-2147483648 2147483647
9.8.5

I/O#1 logic operand (ID=1304)

Parameter defines when event is sent: 0 – on range exit; 1 – on range entrance; 2 – both;
3 – monitoring; 4 – hysteresis.
Minimal Maximum
value value
0 4
9.8.6

I/O#1 averaging length (ID=1305)

Parameter defines I/O property sample length to average. If no averaging needed default
value is 1.
Minimum Maximum
value value
0 2592000
Other I/O property elements can be configured in same logic. All I/O element parameters
are listed in the next table.
Recommended
value
I/O#1 property parameter (ID=1300)
0
I/O#1 logic operand (ID=1304)
I/O#1 averaging length (ID=1305)
Recommended
value
3
I/O#1 averaging length (ID=1305)
Recommended
value
1
I/O#1 logic operand (ID=1304)
Goes with (depends on)
parameters
priority (ID=1301)
I/O#1
I/O#1 High level (ID=1302)
Goes with (depends on)
parameters
I/O#1 property parameter
(ID=1300)
(ID=1301)
I/O#1 priority
I/O#1 High level (ID=1302)
I/O#1 Low level (ID=1303)
Goes with (depends on)
parameters
I/O#1 property parameter
(ID=1300)
(ID=1301)
I/O#1 priority
I/O#1 High level (ID=1302)
I/O#1 Low level (ID=1303)
Value
type
S32
Value
type
S8
Value
type
S32
78