Table of Contents
Advertisement
6.3 Parameters Configuration
6.3.1 Global parameters Settings
Global parameters do not depend on selected profile; they are common for all profiles. To
configure these parameters choose the TAB named "Global Parameters" and make all necessary
changes (Figure 25)
Parameter Name
Allows selecting profile switching method. When 'Profile change on
Profile change on
event' is disabled – FM6300 switches profiles depending on GSM
event
operator code method. Otherwise it switches profiles depending on I/O
events.
Are used to switch between two data sending modes: starting from
newest records or starting from oldest record. Active data link timeout
Record Settings
defines how many seconds should FM6300 keep connection to the
server before disconnecting after successful data transfer. Note that
even if it disconnects from server, it always keep active GPRS session.
Defines accelerometer how many seconds should movement be
detected by accelerometer in order to set movement for FM6300
Accelerometer
application and how many seconds after movement is not detected by
settings
accelerometer FM6300 application should treat like movement is still
there.
Static Navigation
Functionlity filters GNSS data and filters GNSS jums till movement or
settings
ignition detected. Parameter can be enabled or disabled.
Allows choosing satellite systems – GNSS(all available), GPS, GLONASS,
GNSS Settings
GNSS+SBAS, GPS+SBAS.
Network Time
GNSS Settings, where you Enables/Disables time synchronization from
Figure 25 FM6300 Global parameters
Table 9 Global parameters description
Parameter description
34
Advertisement
Table of Contents
