System Settings; Gps Settings - Teltonika FM2 Quick Start Manual

2.2 System Settings

'Sleep Mode' enables or disables sleep mode for FM2. If sleep mode is enabled, FM2 will check
if there were no records for the last five minutes and if movement sensor status is 'not moving' and
will switch FM2 to sleep mode. New SMS, input status change or movement sensor indication that
movement is detected wakes up FM2.

2.3 GPS settings

'GPS Settings' should have GPS set to 'Enabled'. 'Min. Period' defines a time interval to make a
new record, 'Min. Distance' defines a distance interval to make a new record and 'Min. Angle' defines
angle change compared to previous coordinate to make a new record. All these settings are active and
FM2 is using them all to record new coordinates. By default time interval should be used to set interval
for object when it is not moving, distance should be used to determine maximum distance between
points when vehicle is moving in a straight line and angle should serve as precision corrector. If less
detailed track is needed, angle can be set to higher value and only distance interval may be used.
4