4
5
6
7
8
9
10
11
12
Example: FM10,00.06.02,0,356307044051570,Jul 6
2015,07.01,0E,EF,14,1.07.00,1373,G33_030106#,,,,,
6.1.10 getio
Response details
DI1
Example: DI1:0
6.1.11 readio #
Response details
ID
Value
Example: I/O ID:3 Value:0
6.1.12 getparam ####
Read parameter value. ID consists of 3 or 4 digits. Detailed list of parameters and IDs can
be found in chapter number 8 "Parameter List"
Example: 'getparam 1245' command will request server IP address.
6.1.13 setparam ####
Sets new value for parameter. ID consists of 3 or 4 digits. Detailed list of parameters and
IDs can be found in chapter number 8 "Parameter List"
Example: 'setparam 1245 127.0.0.1' will change configured IP address.
6.1.14 flush #,#,#,#,#,#,#
Initiates all data sending by GPRS to specified target server. Comma separated parameters
go as numbered:
1. # – IMEI;
2. # – APN;
3. # – GPRS LOGIN;
4. # – GPRS PASSWORD;
5. # – IP;
6. # – PORT;
7. # – MODE (0 – TCP; 1 – UDP).
IMEI
Firmware compile date
Bootloader version
Device ID
Flash Manufacturer ID
Flash Capacity
Version of modem application
HW revision voltage
GNSS module description
Description
Digital Input 1 state
Description
I/O element ID
I/O Element value
51