Sms Command List - Teltonika FM1000 ST User Manual

FM1000 has inbuilt accelerometer which can easily be configured for individual needs.
Accelerometer Sensitivity Settings.
Acceleration range specifies measurement range for accelerometer. According to this
parameter you can configure AXL measurement range: 2G - the highest sensitivity (The smaller
the range the more precise configuration can be set), 16G - low sensitivity.

6 SMS COMMAND LIST

Read chapter 5.10.2 SMS to learn how to construct a proper SMS message and send it to
FM1000 device. All commands are case sensitive. While FM1000 operates in Deep Sleep mode
and user tries to send SMS message it cannot arrive to FM1000 device, because GSM/GPRS
module is disabled most of the time (wake up depends on Send Period parameter). FM1000 will
receive the SMS when it wakes up (exits deep sleep mode).
6.1 SMS command list
Command
getstatus
getweektime
getops
getcfgtime
ggps
getgps
getinfo
getver
allver
cpureset
resetprof
deleterecords
getio
readio #
getparam #
setparam # #
Figure 36 Accelerometer configuration
Modem Status information
Current device time, Day of Week and amount of minutes
passed since start of week
List of currently available GSM operator
Date and Time of last successful configuration
Google Map Link information
Current GNSS data and time
Device runtime system information
Device / Modem / Code version information
Device / HW version information
Reset CPU
Reset all FLASH1 profile configuration to default profile
Delete all records saved on FLASH
ReaMS Event Predefined digital input 1
Readout input value according entered ID, # - ID value
Readout parameter value according entered ID.
# - ID value.
Set parameter value according entered ID and Value.
1.# - ID value.
2.# - New Parameter Value
Description Response
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
47