Default Configuration Settings - Teltonika TMT250 Quick Manual

DEFAULT CONFIGURATION SETTINGS

MOVEMENT AND IGNITION DETECTION:
MOVEMENT
will be detected by accelerometer
DEVICE MAKES A RECORD ON MOVING IF ONE OF THESE EVENTS HAPPEN:
120
seconds passes
ANGLE DIFFERENCE
between last coordinate and current
position is greater than 10° degrees
DEVICE MAKES A RECORD ON STOP IF:
1
Hour passes
After successful SMS configuration, TMT250 device will synchronize time and update records to configured server. Time intervals
and default I/O elements can be changed by using
wiki.teltonika-mobility.com/view/Teltonika_Configurator_Introduction
1
wiki.teltonika-mobility.com/view/TMT250_Parameter_list
2
Telematics
RECORDS SENDING TO SERVER:
Teltonika Configurator or SMS parameters
1
TRAVELED DISTANCE
100 meters
SPEED DIFFERENCE
between last coordinate and current
position is greater than 10 km/h
IF DEVICE HAS MADE A RECORD
120 sec on move and 600 send on stop
.
2
Quick Manual v1.0 // TMT250 9