Disabling An Interface From Generating Link Up/Down Logging Information; Displaying And Maintaining Information Center - HP 6125XLG Configuration Manual

Step
2. Enable duplicate log
suppression.
Disabling an interface from generating link
up/down logging information
By default, all interfaces generate link up or link down log information when the state changes. In some
cases, you might want to disable specific interfaces from generating this information. For example:
You are concerned only about the states of some interfaces. In this case, you can use this function
•
to disable other interfaces from generating link up and link down log information.
• An interface is unstable and continuously outputs log information. In this case, you can disable the
interface from generating link up and link down log information.
Use the default setting in normal cases to avoid affecting interface status monitoring.
To disable an interface from generating link up/down logging information:
Step
1. Enter system view.
2. Enter interface view.
3. Disable the interface from
generating link up or link
down logging information.

Displaying and maintaining information center

Execute display commands in any view and reset commands in user view.
Task
Display the information of each output destination.
Display the state and the log information of the log
buffer.
Display a summary of the log buffer.
Display the configuration of the log file.
Clear the log buffer.
Command
info-center logging suppress
duplicates
Command
system-view
interface interface-type
interface-number
undo enable log updown
Command
display info-center
display logbuffer [ reverse ] [ level severity | size
buffersize | slot slot-number ] *
display logbuffer summary [ level severity | slot
slot-number ] *
display logfile summary
reset logbuffer
62
Remarks
By default, duplicate log
suppression is disabled.
Remarks
N/A
N/A
By default, all interfaces generate
link up and link down logging
information when the interface
state changes.