Figure 4.187 Management > Power Over Ethernet > Poe System Settings; Figure 4.188 Management > Power Over Ethernet > Poe Port Settings - Advantech EKI-7720 Series User Manual

The following table describes the items in the previous figure.
Item
Maximum Power
Available
Legacy Mode
Power-Limit-Method
Apply
Reset PoE Port
The ensuing figure displays the PoE System Information screen. The following
information displays: Actual Power Consumption, Current Power Available, Maxi-
mum Power Available, Legacy Mode, Overload Disconnect Type and PoE Port
Power Limit Method (PLFC).
Figure 4.187 Management > Power Over Ethernet > PoE System Settings
4.9.3.2 PoE Port Settings
The PoE Port Settings page allows you to configure the port status, its power limita-
tions, legacy mode status, and power limit settings.
To access this page, click Management > Power Over Ethernet > PoE Port Set-
tings.
Figure 4.188 Management > Power Over Ethernet > PoE Port Settings
The following table describes the items in the previous figure.
Item
Port
Power Switch
Priority
Power Limit
EKI-7720 Series User Manual
Description
Select the value in Watts to set the maximum available power.
Click the drop-down menu to disable or enable the PoE legacy mode.
Click the drop-down menu to select the limit method for the PoE
power setting. The following options are available:
 user-defined-power-limit
 power-limit-from-class
lcut-max

Click Apply to save the values and update the screen.
Click Reset PoE Port to reset the PoE settings to default value.
Description
Click the drop-down menu to select a PoE port.
Select Enabled or Disabled to designate the PoE port function by
ports.
Click the drop-down menu to configure the power supply priority:
Critical, Low, Medium or High. Default is Low.
Enter a number to set the port power current limitation to be given to
the Powered Device (PD)
119