Configuration Of The On-Site Display; Factory Settings Of The On-Site Display For Level Measurements; Factory Settings Of The On-Site Display For Interface Measurements; Adjustment Of The On-Site Display - Endress+Hauser Levelflex FMP51 Operating Instructions Manual

Levelflex FMP51, FMP52, FMP54 FOUNDATION Fieldbus
Endress+Hauser
11.7

Configuration of the on-site display

11.7.1

Factory settings of the on-site display for level measurements

Parameter Factory setting for devices with 1 current
output
Format display 1 value, max. size
Value 1 display Level linearized
Value 2 display Distance
Value 3 display Current output 1
Value 4 display None
11.7.2 Factory settings of the on-site display for interface
measurements
Parameter Factory setting for devices with 1 current
output
Format display 1 value, max. size
Value 1 display Interface linearized
Value 2 display Level linearized
Value 3 display Thickness upper layer
Value 4 display Current output 1
11.7.3

Adjustment of the on-site display

The on-site display can be adjusted in the following menu:
Setup → Advanced setup → Display
Commissioning via operating menu
Factory setting for devices with 2 current
outputs
1 value, max. size
Level linearized
Distance
Current output 1
Current output 2
Factory setting for devices with 2 current
outputs
1 value, max. size
Interface linearized
Level linearized
Current output 1
Current output 2
103