Endress+Hauser Levelflex FMP51 Operating Instructions Manual page 184

Operating menu
Level correction
Navigation
Description
User entry
Factory setting
Additional information
Manual thickness upper layer
Navigation
Description
User entry
Factory setting
184
1 Suppression of interference echoes at the top end of the probe.
2 Suppression of the level signal in case of a flooded bypass.
UB Upper blocking distance
 Setup → Advanced setup → Interface → Level correction
Specify level correction (if required).
–200 000.0 to 200 000.0 %
0.0 %
The value specified in this parameter is added to the measured total and interface levels
(before linearization).
 Setup → Advanced setup → Interface → Man.thick.up.lay
Specify the manually determined interface thickness UP (i.e. the thickness of the upper
medium).
0 to 200 m
0 m
Levelflex FMP51, FMP52, FMP54 FOUNDATION Fieldbus
1
UB
2
UB
Endress+Hauser
A0013220

