Endress+Hauser Levelflex FMP51 Operating Instructions Manual page 117

Levelflex FMP51, FMP52, FMP54 FOUNDATION Fieldbus
Endress+Hauser
Severity of the Default diagnostic category Source of the
event
1) This event can be removed from the group in order to define its behavior individually; see section
"Configurable area".
Severity of the Default diagnostic category Source of the
event
Lowest severity Maintenance required (M)
Commissioning (block-based operation)
Bit Events within the group
event
Configuration 21 S441: Current output 1
Process 20 • S801: Energy too low
• S825: Operating temperature
• S921: Change of reference
• S942: In safety distance
• S943: In blocking distance
• S944: Level range
• S968: Level limited
Bit Events within the group
event
Sensor 19 not used in Levelflex
Elektronics 18 • M270: Main electronics failure
• M272: Main electronics failure
• M311: Electronics failure
Configuration 17 M438: Data set
Process 16 M803: Current loop 1
1)
117