Endress+Hauser Levelflex FMP51 Operating Instructions Manual page 169

Levelflex FMP51, FMP52, FMP54 FOUNDATION Fieldbus
Interface distance
Navigation
Prerequisite
Description
Additional information
Confirm distance
Navigation
Description
Selection
Factory setting
* Visibility depends on order options or device settings
Endress+Hauser
 Setup → Interface dist.
Operating mode (→  159) = Interface or Interface with capacitance
Displays the measured distance D
threaded connection) and the interface.
The unit is defined in the Distance unit parameter (→  159).
 Setup → Confirm distance
Specify, whether the measured distance matches the real distance.
Depending on the selection the device automatically sets the range of mapping.
• Manual map
• Distance ok
• Distance unknown
*
• Distance too small
*
• Distance too big
• Tank empty
• Delete map
Distance unknown
between the reference point (lower edge of flange or
I
D
I
D
Operating menu
I
A0013202

169