Endress+Hauser Levelflex FMP51 Operating Instructions Manual page 198

Operating menu
Factory setting
Additional information
198
Disable
Meaning of the options
• Disable
The measured level is not linearized.
If Linearization type (→  191) = Table at the same time, the device issues error
message F435.
• Enable
The measured level is linearized according to the table.
When editing the table, the Activate table parameter is automatically reset to
Disable and must be reset to Enable after the table has been entered.
Levelflex FMP51, FMP52, FMP54 FOUNDATION Fieldbus
Endress+Hauser