Mounting Kit, Isolated - Endress+Hauser Levelflex FMP51 Operating Instructions Manual

Levelflex FMP51, FMP52, FMP54 FOUNDATION Fieldbus
Endress+Hauser
16.1.4

Mounting kit, isolated

Accessory Description
Mounting kit, isolated
can be used for
• FMP50
• FMP51
• FMP54
• FMP56
• FMP57
 34
1
2
For reliably insulated fixing of the probe.
Maximum process temperature: 150 °C (300 °F)
For rope probes 4 mm (¹⁄₆ in) or 6 mm (1/4 in) with PA>steel:
• Diameter D = 20 mm (0.8 in)
• Order-No.: 52014249
For rope probes 6 mm (¹⁄₄ in) or 8 mm (1/3 in) with PA>steel:
• Diameter D = 25 mm (1 in)
• Order-No.: 52014250
Due to the risk of electrostatic charge, the insulating sleeve is not suitable for use
in hazardous areas. In these cases the fixing must be reliably grounded.

1
2
Scope of supply of the mounting kit:
Insulating sleeve
Eye-bolt
The mounting kit can also be ordered directly with the device (see the
Levelflex product structure, feature 620 "Accessory Enclosed", option PG
"Mounting kit, isolated, rope").
Accessories
A0013586
139