Configuration Of The On-Site Display; Factory Settings Of The On-Site Display For Level Measurements; Adjustment Of The On-Site Display - Endress+Hauser Levelflex FMP50 Operating Instructions Manual

Levelflex FMP50 PROFIBUS PA
Endress+Hauser
11.5

Configuration of the on-site display

11.5.1

Factory settings of the on-site display for level measurements

Parameter Factory setting for devices with 1 current
output
Format display 1 value, max. size
Value 1 display Level linearized
Value 2 display Distance
Value 3 display Current output 1
Value 4 display None
11.5.2

Adjustment of the on-site display

The on-site display can be adjusted in the following menu:
Setup → Advanced setup → Display
Commissioning via operating menu
Factory setting for devices with 2 current
outputs
1 value, max. size
Level linearized
Distance
Current output 1
Current output 2
81