Configuring A Port To Operate In Manual Voice Vlan Assignment Mode - HP 3600 v2 series Configuration Manual

To do...
Enter Ethernet interface
view
Configure the port to
operate in automatic
voice VLAN assignment
mode
Enable the voice VLAN
feature
NOTE:
A protocol-based VLAN on a hybrid port can process only untagged inbound packets, whereas the voice
VLAN in automatic mode on a hybrid port can process only tagged voice traffic. Do not configure a VLAN
as both a protocol-based VLAN and a voice VLAN. For more information, see the chapter "VLAN
configuration."
Configuring a port to operate in manual voice VLAN
assignment mode
Follow these steps to set a port to operate in manual voice VLAN assignment mode:
To do...
Enter system view
Enable the voice VLAN
security mode
Add a recognizable
OUI address
Enter interface view
Configure the port to
operate in manual voice
VLAN assignment mode
Assign the access, trunk,
or hybrid port in manual
voice VLAN assignment
mode to the voice VLAN
Configure the voice
VLAN as the PVID of the
trunk or hybrid port
Use the command...
interface interface-type
interface-number
voice vlan mode auto
voice vlan vlan-id enable
Use the command...
system-view
voice vlan security enable
voice vlan mac-address oui mask
oui-mask [ description text ]
interface interface-type
interface-number
undo voice vlan mode auto
For the configuration procedure,
see the chapter "VLAN
configuration."
For the configuration procedure,
see the chapter "VLAN
configuration."
157
Remarks
—
Optional
By default, the automatic voice VLAN assignment
mode is enabled.
The voice VLAN assignment modes on different ports
are independent of one another.
Required
By default, the voice VLAN feature is disabled.
Remarks
—
Optional
By default, the voice VLAN security mode is
enabled.
Optional
By default, each voice VLAN has default OUI
addresses configured. For the default OUI
addresses of different vendors, see
—
Required
By default, the manual voice VLAN assignment
mode is disabled.
Required
After you assign an access port to the voice
VLAN, the voice VLAN becomes the PVID of the
port automatically.
Optional
This operation is required for untagged
inbound voice traffic and prohibited for tagged
inbound voice traffic.
Table 15.