HP 3600 v2 series Configuration Manual page 80

Task
Setting the spanning tree mode
Configuring the device priority
Configuring the timeout factor
Configuring the maximum port rate
Configuring the
leaf nodes
Configuring path costs of ports
Configuring the port priority
Configuring the mode a port uses to recognize/send MSTP
packets
Enabling the output of port state transition information
Enabling the spanning tree feature
Configuring TC snooping
Configuring protection functions
Complete the following tasks to configure RSTP:
Task
Setting the spanning tree mode
Configuring the root bridge or a secondary root bridge
Configuring the device priority
Configuring the network diameter of a switched network
Configuring spanning tree timers
Configuring
Configuring the timeout factor
the root
bridge
Configuring the maximum port rate
Configuring edge ports
Configuring the port link type
Configuring the mode a port uses to recognize/send MSTP
packets
Enabling the output of port state transition information
Enabling the spanning tree feature
Setting the spanning tree mode
Configuring
the leaf
Configuring the device priority
nodes
Configuring the timeout factor
Configuring the maximum port rate
72
Remarks
Required
Configure the device to work
in STP-compatible mode.
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Required
Optional
Optional
Remarks
Required
Configure the device to work
in RSTP mode.
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Optional
Required
Required
Configure the device to work
in RSTP mode.
Optional
Optional
Optional