HP 3600 v2 series Configuration Manual page 207

To do...
Create a class and enter class view
Specify a CVLAN as the match
criterion
Return to system view
Create a traffic behavior and enter
traffic behavior view
Configure an SVLAN marking
action
Return to system view
Create a QoS policy and enter
QoS policy view
Associate the class with the
behavior to map the CVLAN to the
SVLAN
Configuring a downlink policy
Follow these steps to configure a downlink policy to map SVLANs back to CVLANs:
To do...
Enter system view
Create a class and enter class view
Configure an SVLAN as the match
criterion
Return to system view
Create a traffic behavior and enter
traffic behavior view
Configure a CVLAN marking
action
Return to system view
Create a QoS policy and enter
QoS policy view
Associate the class with the
behavior to map the SVLAN to the
CVLAN
Configuring the customer-side port
Follow these steps to configure the customer-side port:
To do...
Enter system view
Use the command...
traffic classifier tcl-name
[ operator { and | or } ]
if-match customer-vlan-id vlan-id
quit
traffic behavior behavior-name
remark service-vlan-id vlan-id
quit
qos policy policy-name
classifier tcl-name behavior
behavior-name
Use the command...
system-view
traffic classifier tcl-name [ operator
{ and | or } ]
if-match service-vlan-id vlan-id
quit
traffic behavior behavior-name
remark customer-vlan-id vlan-id
quit
qos policy policy-name
classifier tcl-name behavior
behavior-name
Use the command...
system-view
199
Remarks
Required
Repeat these steps to configure one
class for each CVLAN.
Required
Repeat these steps to configure one
behavior for each SVLAN.
Required
Required
Repeat this step to create other
CVLAN-to-SVLAN mappings.
Remarks
—
Required
Repeat these steps to configure
one class for each SVLAN.
Required
Repeat these steps to configure
a behavior for each CVLAN.
Required
Required
Repeat this step to create other
CVLAN-to-SVLAN mappings.
Remarks
—