HP 3600 v2 series Configuration Manual page 213

To do...
Associate the class with the behavior
Configuring a downlink policy for the customer-side port
The downlink policy on the customer-side port replaces local SVLAN and CVLAN pairs with foreign
SVLAN and CVLAN pairs.
Follow these steps to configure a downlink policy for the customer-side port:
To do...
Enter system view
Create a class and enter class view
Specify a local CVLAN as a match
criterion
Specify a local SVLAN as a match
criterion
Return to system view
Create a traffic behavior and enter
traffic behavior view
Configure a CVLAN marking action to
replace the local CVLAN ID with a
foreign CVLAN ID
Configure an SVLAN marking action to
replace the local SVLAN ID with a
foreign SVLAN ID
Return to system view
Create a QoS policy and enter QoS
policy view
Associate the class with the behavior
Configuring the customer-side port
Follow these steps to configure the customer-side port:
To do...
Enter system view
Enter Ethernet interface view
Configure the port as a trunk port
Use the command...
classifier tcl-name behavior
behavior-name
Use the command...
system-view
traffic classifier tcl-name
[ operator and ]
if-match customer-vlan-id vlan-id
if-match service-vlan-id vlan-id
quit
traffic behavior behavior-name
remark customer-vlan-id vlan-id
remark service-vlan-id vlan-id
quit
qos policy policy-name
classifier tcl-name behavior
behavior-name
Use the command...
system-view
interface interface-type
interface-number
port link-type trunk
205
Remarks
Required
Repeat this step to create other
class-behavior associations.
Remarks
—
Required
Repeat these steps to create
one class for each local
CVLAN and SVLAN pair.
Required
Repeat these steps to create
one VLAN marking behavior
for each local CVLAN and
SVLAN pair.
Required
Required
Repeat this step to create other
class-behavior associations.
Remarks
—
—
Required
The default link type of an
Ethernet port is access.