Configuring A Port To Operate In Manual Voice Vlan Assignment Mode - HP A3100-8 v2 SI Configuration Manual

To do...
Set the voice VLAN aging time
Enable the voice VLAN security
mode
Add a recognizable OUI address
Enter Ethernet interface view
Configure the port to operate in
automatic voice VLAN assignment
mode
Enable voice VLAN on the port
NOTE:
A protocol-based VLAN on a hybrid port can process only untagged inbound packets, whereas the voice
VLAN in automatic mode on a hybrid port can process only tagged voice traffic. Do not configure a VLAN
as both a protocol-based VLAN and a voice VLAN. For more information, see the chapter "VLAN
configuration."
Configuring a port to operate in manual voice VLAN
assignment mode
Follow these steps to set a port to operate in manual voice VLAN assignment mode:
To do...
Enter system view
Enable the voice VLAN security
mode
Add a recognizable OUI address
Use the command...
voice vlan aging minutes
voice vlan security enable
voice vlan mac-address oui mask
oui-mask [ description text ]
interface interface-type
interface-number
voice vlan mode auto
voice vlan vlan-id enable
Use the command...
system-view
voice vlan security enable
voice vlan mac-address oui mask
oui-mask [ description text ]
119
Remarks
Optional
1440 minutes by default.
The voice VLAN aging time
configuration is only applicable on
ports in automatic voice VLAN
assignment mode.
Optional
Enabled by default.
Optional
By default, each voice VLAN has
default OUI addresses configured.
For the default OUI addresses of
different vendors, see Table
—
Optional
Automatic voice VLAN assignment
mode is enabled by default.
The voice VLAN assignment modes
on different ports are independent
of one another.
Required
Disabled by default
Remarks
—
Optional
Enabled by default.
Optional
By default, each voice VLAN has
default OUI addresses configured.
For the default OUI addresses of
different vendors, see Table
14.
14.