Configuring A Port To Operate In Manual Voice Vlan Assignment Mode; Configuration Restrictions And Guidelines; Configuration Procedure - HP 3100 Series Configuration Manual

Step
Enable the voice VLAN
3.
security mode.
Add a recognizable OUI
4.
address.
Enter Layer 2 Ethernet
5.
interface view.
Configure the link type of the
6.
Ethernet interface.
Configure the port to operate
7.
in automatic voice VLAN
assignment mode.
Enable the voice VLAN
8.
feature.
Configuring a port to operate in manual voice
VLAN assignment mode

Configuration restrictions and guidelines

•
You can configure different voice VLANs on different ports at the same time. However, you can
configure one port with only one voice VLAN, and this voice VLAN must be a static VLAN that
already exists on the device.
•
Do not enable voice VLAN on the member ports of a link aggregation group. For more
information about link aggregation, see "Configuring Ethernet link aggregation."
•
For a port that is enabled with voice VLAN and operating in manual mode, you must manually
assign the port to the voice VLAN to make the voice VLAN take effect.

Configuration procedure

To set a port to operate in manual voice VLAN assignment mode:
Step
Enter system view.
1.
Enable the voice VLAN
2.
security mode.
Command
voice vlan security enable
voice vlan mac-address oui
mask oui-mask [ description
text ]
interface interface-type
interface-number
•
port link-type trunk
•
port link-type hybrid
voice vlan mode auto
voice vlan vlan-id enable
Command
system-view
voice vlan security enable
130
Remarks
Optional.
By default, the voice VLAN
security mode is enabled.
Optional.
By default, each voice VLAN has
default OUI addresses
configured. For the default OUI
addresses of different vendors,
see Table 14.
N/A
Use one of the commands.
Optional.
By default, the automatic voice
VLAN assignment mode is
enabled.
By default, the voice VLAN
feature is disabled.
Remarks
N/A
Optional.
By default, the voice VLAN
security mode is enabled.