HP 3600 v2 series Configuration Manual page 49

To do...
Enter Layer 2 Ethernet
interface view
Assign the Ethernet
interface to the
aggregation group
Assign the port an
aggregation priority
Set the LACP timeout
interval on the port to
the short timeout interval
(1 second)
Configuring a Layer 3 dynamic aggregation group
Follow these steps to configure a Layer 3 dynamic aggregation group:
To do...
Enter system view
Set the system LACP
priority
Create a Layer 3
aggregate interface and
enter Layer 3 aggregate
interface view
Configure the aggregation
group to work in dynamic
aggregation mode
Exit to system view
Enter Layer 3 Ethernet
interface view
Assign the Ethernet
interface to the
aggregation group
Assign the port an
aggregation priority
Use the command...
interface interface-type
interface-number
port link-aggregation
group number
link-aggregation
port-priority port-priority
lacp period short
Use the command...
system-view
lacp system-priority
system-priority
interface route-aggregation
interface-number
link-aggregation mode
dynamic
quit
interface interface-type
interface-number
port link-aggregation group
number
link-aggregation port-priority
port-priority
41
Remarks
Required
Repeat these two steps to assign more Layer 2 Ethernet
interfaces to the aggregation group.
Optional
By default, the aggregation priority of a port is 32768.
Changing the aggregation priority of a port might affect
the aggregation state of the ports in the dynamic
aggregation group.
Optional
By default, the LACP timeout interval on a port is the
long timeout interval (30 seconds).
Remarks
—
Optional
By default, the system LACP priority is 32768.
Changing the system LACP priority might affect
the aggregation state of the ports in the
dynamic aggregation group.
Required
When you create a Layer 3 aggregate
interface, the system automatically creates a
Layer 3 static aggregation group numbered the
same.
Required
By default, an aggregation group works in
static aggregation mode.
—
Required
Repeat these two steps to assign more Layer 3
Ethernet interfaces to the aggregation group.
Optional
By default, the aggregation priority of a port is
32768.
Changing the aggregation priority of a port
might affect the aggregation state of ports in the
dynamic aggregation group.