HP 3600 v2 series Configuration Manual page 212

To do...
Enter system view
Create a class and enter class view
Specify a foreign CVLAN as a match
criterion
Specify a foreign SVLAN as a match
criterion
Return to system view
Create a traffic behavior and enter
traffic behavior view
Configure an SVLAN marking action to
replace the foreign SVLAN ID with a
local SVLAN ID
Return to system view
Create a QoS policy and enter QoS
policy view
Associate the class with the behavior
Configuring an uplink policy for the network-side port
The uplink policy on the network-side port modifies the CVLAN ID of incoming traffic.
Follow these steps to configure an uplink policy for the network-side port:
To do...
Enter system view
Create a class and enter class view
Specify a foreign CVLAN as a match
criterion
Specify a local SVLAN as a match
criterion
Return to system view
Create a traffic behavior and enter
traffic behavior view
Configure a CVLAN marking action to
replace the foreign CVLAN ID with a
local CVLAN ID
Return to system view
Create a QoS policy and enter QoS
policy view
Use the command...
system-view
traffic classifier tcl-name
[ operator and ]
if-match customer-vlan-id
vlan-id
if-match service-vlan-id
vlan-id
quit
traffic behavior
behavior-name
remark service-vlan-id
vlan-id
quit
qos policy policy-name
classifier tcl-name behavior
behavior-name
Use the command...
system-view
traffic classifier tcl-name
[ operator and ]
if-match customer-vlan-id vlan-id
if-match service-vlan-id vlan-id
quit
traffic behavior behavior-name
remark customer-vlan-id vlan-id
quit
qos policy policy-name
204
Remarks
—
Required
Repeat these steps to create one
class for each foreign CVLAN and
SVLAN pair.
Required
Repeat these steps to configure one
SVLAN marking action for each
CVLAN and SVLAN pair.
Required
Required
Repeat this step to create other
class-behavior associations.
Remarks
—
Required
Repeat these steps to create one
class for each local SVLAN and
foreign CVLAN pair.
Required
Repeat these steps to configure
one CVLAN marking action for
each local SVLAN and foreign
CVLAN pair.
Required