Rigol MSO2000A Series User Manual page 153

Chapter 6 MATH and Measurements
Press MATH  Operate to select "Logic":
Press Formula to select the desired logic formula and the default is "AND".

Press Source A and Source B respectively to select the desired channels (CH1,

CH2 or any channel of D0-D15).
Press

Press

Press Invert to turn the inverted display of the operation results on or off.

Press Threshold A and use

operation.
Press Threshold B and use

operation.
Note:
Threshold A or Threshold B will be hidden automatically and cannot be set.
Press Label to define a label for the operation results. For the details, please

refer to "MATH Label".
HORIZONTAL

used to adjust the horizontal position and scale of the operation results.
MSO2000A/DS2000A User's Guide
nd Quality Products Online at:
and use to adjust the vertical position of the operation results.
and use to adjust the vertical scale of the operation results.
When Source A or Source B is set to any channel of D0-D15,
POSITION and HORIZONTAL
GlobalTestSupply
www.
to set the threshold of source A in logic
to set the threshold of source B in logic
.com
RIGOL
SCALE can also be
6-11
sales@GlobalTestSupply.co