Working Environment - Rigol MSO2000A Series User Manual
Digital oscilloscope
Hide thumbs
Also See for MSO2000A Series:
- Programming manual (376 pages) ,
- Quick manual (43 pages) ,
- Service manual (30 pages)
Table of Contents
Advertisement
RIGOL
Working Environment
Temperature
Operating: 0℃ to +50℃
Non-operating: -40℃ to +70℃
Humidity
0℃ to +30℃: ≤95% relative humidity
+30℃ to +40℃: ≤75% relative humidity
+40℃ to +50℃: ≤45% relative humidity
WARNING
To avoid short circuit inside the instrument or electric shock, please do
not operate in humid environment.
Altitude
Operating: below 3 km
Non-operating: below 15 km
Installation (Overvoltage) Category
This product is powered by mains conforming to installation (overvoltage) category
II.
WARNING
Make sure that no overvoltage (such as that caused by thunderbolt) can
reach the product, or else the operator might expose to danger of electric
shock.
Installation (Overvoltage) Category Definitions
Installation (overvoltage) category I refers to signal level which is applicable to
equipment measurement terminals connected to the source circuit. In these
terminals, precautions are done to limit the transient voltage to the corresponding
low level.
Installation (overvoltage) category II refers to the local power distribution level
which is applicable to equipment connected to the AC line (AC power).
XII
nd Quality Products Online at:
GlobalTestSupply
www.
MSO2000A/DS2000A User's Guide
.com
sales@GlobalTestSupply.co
Advertisement
Table of Contents
