Signal Source; Record - Rigol MSO2000A Series User Manual

Chapter 1 Quick Start

Signal Source

Note:
oscilloscopes.

Record

Stop
Record: press this key to start recording the waveform. The backlight is illuminated
in red and flashes. Besides, when the record constant on (Open) is enabled, the
backlight will also be illuminated in red and flashes.
Play/Pause: in the stop or pause state, press this key to play back the waveform
and press again to pause the play. The backlight is illuminated in yellow.
Stop: press this key to stop the waveform being recorded or being played back. The
backlight is illuminated in orange.
MSO2000A/DS2000A User's Guide
nd Quality Products Online at:
Press this key to enter the source setting interface. You can enable
or disable the output of the [Source1] or [Source2] connector at
the rear panel, set the output signal waveform and parameters,
turn on or off the state display of the current signal source.
This function is only available for MSO2000A-S and DS2000A-S models
Play/Pause Record
GlobalTestSupply
www. .com
sales@GlobalTestSupply.co
RIGOL
1-19