Multiplication; Division - Rigol MSO2000A Series User Manual

Chapter 6 MATH and Measurements
Press Label to define a label for the operation results. For the details, please

refer to "MATH Label".
HORIZONTAL

used to adjust the horizontal position and scale of the operation results.

Multiplication

Multiply the waveform voltage values of signal source A and B point by point and
display the results. Press MATH  Operate to select "A x B":
Press Source A and Source B respectively to select the desired channels (CH1

or CH2).
Press

Press

Press Invert to turn the inverted display of the operation results on or off.

Press Label to define a label for the operation results. For the details, please

refer to "MATH Label".
HORIZONTAL

used to adjust the horizontal position and scale of the operation results.

Division

Divide the waveform voltage values of signal source A by that of source B point by
point and display the results. It can be used to analyze the multiple relationships of
waveforms in the two channels.
Note:
division is treated as 0.
Press MATH  Operate to select "A ÷ B":
Press Source A and Source B respectively to select the desired channels (CH1

or CH2).
Press

Press

Press Invert to turn the inverted display of the operation results on or off.

Press Label to define a label for the operation results. For the details, please

refer to "MATH Label".
MSO2000A/DS2000A User's Guide
nd Quality Products Online at:
POSITION and HORIZONTAL
and use to adjust the vertical position of the operation results.
and use
POSITION and HORIZONTAL
When the waveform voltage value of signal source B is 0, the result of the
and use to adjust the vertical position of the operation results.
and use
GlobalTestSupply
www.
to adjust the vertical scale of the operation results.
to adjust the vertical scale of the operation results.
SCALE can also be
SCALE can also be
.com
sales@GlobalTestSupply.co
RIGOL
6-3