Chapter 5 To Trigger the Oscilloscope
RIGOL
Noise Rejection
Noise rejection can reject the high frequency noise in the signal and reduce the
possibility of miss-trigger of the oscilloscope.
Press MENU Setting Noise Reject in the trigger control area (TRIGGER) at
the front panel to enable or disable noise rejection.
Note:
When the trigger source is any of D0 to D15, Noise Reject is grayed out and
disabled.
MSO2000A/DS2000A User's Guide
5-7
GlobalTestSupply
www.
.com
nd Quality Products Online at:
sales@GlobalTestSupply.co