Auto Measurement; Quick Measurement After Auto - Rigol MSO2000A Series User Manual

Chapter 6 MATH and Measurements

Auto Measurement

MSO2000A/DS2000A provides auto measurements of 29 waveform parameters and
the statistics and analysis of the measurement results. What's more, you can also
use the frequency counter to realize more precise frequency measurement.

Quick Measurement after AUTO

When a valid signal is input into the oscilloscope, press AUTO to enable the
waveform auto setting function and open the auto setting menu.

period of the signal on the screen and measures the "Period" and "Frequency" of
the single period waveform currently displayed. The measurement results are
displayed at the bottom of the screen.

periods of the signal on the screen and measures the "Period" and "Frequency"
of the multiple-period waveform currently displayed. The measurement results
are displayed at the bottom of the screen.

edge of the signal on the screen and measures the "Rise Time" of the rising
edge currently displayed. The measurement result is displayed at the bottom of
the screen.

edge of the signal on the screen and measures the "Fall Time" of the falling edge
currently displayed. The measurement result is displayed at the bottom of the
screen.
Pressing Undo softkey will automatically give up the auto setting and restore

the parameter settings before AUTO is pressed.
Besides, you can set the channel coupling mode after AUTO operation (please refer
to "Auto Setting").
MSO2000A/DS2000A User's Guide
nd Quality Products Online at:
: press this softkey and the oscilloscope automatically displays a single
: press this softkey and the oscilloscope automatically displays multiple
: press this softkey and the oscilloscope automatically displays a rising
: press this softkey and the oscilloscope automatically displays a falling
GlobalTestSupply
www. .com
sales@GlobalTestSupply.co
RIGOL
6-15